Calculated result
3.048m
Converted value in m
Formula
UTIL-LENGTH-CONVERT-001Source value × source-unit-to-feet factor ÷ target-unit-to-feet factor
10 ft
Source value
10 ft
Feet equivalent
3.048 m
Metres equivalent
Utilities calculator
Feet to meters converter
Transparent source-to-target length conversion with side-by-side feet and metres equivalents.
By Feroz Sheikh · Formula UTIL-LENGTH-CONVERT-001 v1.0.0 · Tested formula
Formula
UTIL-LENGTH-CONVERT-001v1.0.0Project inputs
Enter your measurements. Switching units converts the same project, including coverage and unit rates. Package yields keep the unit printed beside each field.
Refine measurements and rates at any time. Your current values are included in the material-list PDF.
Planning estimate, not engineering advice. Confirm site measurements and product specifications. Calculation limits.
This utility converts a stated length between feet, metres, inches and centimetres while also displaying canonical feet and metres equivalents for cross-checking.
- Enter the value in its known source unit.
- Choose the source and target units.
- Use the side-by-side canonical values to cross-check drawings, supplier data and calculator inputs.
Add your project costs
Add rates if you are pricing a related project line. Pick a currency — badges, inputs, and totals follow.
This page is geometry, not a material takeoff. Leave rates at zero unless you are pricing a related line. Construclytic does not fetch supplier prices.
How this calculator works
A transparent length unit converter takeoff.
Feroz SheikhWritten by Feroz Sheikh · founder
This utility converts a stated length between feet, metres, inches and centimetres while also displaying canonical feet and metres equivalents for cross-checking.
UTIL-LENGTH-CONVERT-001 is a transparent source-to-target length conversion with side-by-side feet and metres. It does not convert a takeoff. Switch the calculator you are actually using rather than converting a ticket after the fact.
Worked example. Example: 10 ft converts to 3.048 m, 120 in and 304.8 cm. The source and target units remain visible so a result never loses its measurement basis.
See the example inputs and calculated result
This separate example uses the calculator's starting values in imperial units. It stays unchanged when you edit the tool above. Example rates, yields and dimensions are assumptions, not recommendations for your project.
| Input | Example value |
|---|---|
| Value | 10 selected unit |
| Source unit | Feet |
| Target unit | Metres |
Example result: Converted value in m — 3.048 m.
Source value × source-unit-to-feet factor ÷ target-unit-to-feet factor
Use the labelled units above when reproducing this example. To work in metric, switch the calculator to Metric; applicable measurements are converted, while product-specific units remain labelled.
- 1. Enter the value in its known source unit.
- 2. Choose the source and target units.
- 3. Use the side-by-side canonical values to cross-check drawings, supplier data and calculator inputs.
Field notes that change the number
- Pick source and target units, then type the measurement.
- A 100 mm slab is the metric cousin of a 4 in pad — use the slab tool in metric mode for the order.
- Do not mix converted inches into a feet field on another page.
Common mistakes
- Converting a cubic-yard ticket in your head after measuring in metres.
- Treating this as a currency converter.
- Using it as a substitute for the takeoff.
In Qatar and the wider GCC, switch the takeoff calculator to metric. This converter is a check, not the order.
Need the broader workflow? Read the utilities planning guide.
How-to: Pipe internal volume in litres: use inside diameter, not trade size · How to check a rectangular layout with diagonals and 3-4-5 · Metric takeoffs for Qatar and the GCC
Questions
Questions about length unit converter
Does this convert area or volume?
No. This tool converts linear length only; use a geometry calculator before converting calculated area or volume.
Why show feet and metres as well?
Construction references frequently mix systems. Canonical values make the selected conversion easier to audit.
What is the formula ID?
This feet to meters converter publishes formula UTIL-LENGTH-CONVERT-001, version 1.0.0. The ID stays on the result and on the estimate line.